Complete kit CAT D9T WEDICO-construction-models 5920.00 €

price with 19.00% tax + shipping
Article number: 3130-W
Article code: 4250046131305
current stock: Article is in stock

current stock: 1

6 Monate = 1008.73 €
12 Monate = 513.97 €
24 Monate = 266.76 €
36 Monate = 184.51 €
48 Monate = 143.54 €
60 Monate = 118.98 €
72 Monate = 102.78 €

Alle Angaben monatliche Rate ohne Anzahlung. Ein Angebot der Santander Consumer Bank. Eff. Jahreszins zur Zeit 7,90%. Bonität vorausgesetzt. Keine weiteren Kosten.

The new WEDICO-construction-models bulldozer should be on every construction site! With the D9T, we have put special emphasis on functionality, durability and power. The caterpillar has 2 extremely strong Dunker engines, which are also designed for long travel times very energy efficient. The caterpillar, like the original, can lift, tilt and tilt the sign (tilting). With the optional rear ripper, the model becomes the ultimate functional model. The kit is of course made of metal and all parts are powder coated. The Montagge is done by screws and is feasible with a very elaborate construction manual for everyone. The kit contains everything except for servos and a suitable remote control everything to operate.

Technical information:

Kit with driver's cab and superstructure, shield, undercarriage, chain drive with 2 electric motors, 2 Dunker SG 45 gear reduction, 1:40 reduction, proportional control of the chains, hydraulic pump with filter and 13 bar operating pressure, 3-way control valve, hose, tees, Locking sleeves, hydraulic oil. Control block for 3 functions: sign in front of u. back, lift u. lower, tilt. Electronics with light sound system and loudspeaker, NiMh battery 12 V 4.5 Ah and speed controller. Optional No. 3131-W: Ripper lift & release reduce.

Needed for operation: Remote control with at least 8 channels, servos for hydraulics and charger.

Length without ripper approx. 480 mm, width approx. 320 mm, height approx. 275 mm, track width approx. 160 mm, weight approx. 13.0 kg.

Length with ripper about 610 mm, the ripping tooth (item No. 3131) is a special accessory.

Please enter your question and we will response immediately

You found us on
Payment methods | Shipping

Wir versenden durch

Lade ...