Complete kit of track dozer CAT D9T with ripper tooth WEDICO-models 7899.00 €

price with 19.00% tax + shipping
Article number: 3133-W
Article code: 3133-W
current stock: Article is in stock

current stock: 1
Amount

FINANZIERUNG
6 Monate = 1345.94 €
12 Monate = 685.78 €
24 Monate = 355.93 €
36 Monate = 246.20 €
48 Monate = 191.52 €
60 Monate = 158.75 €
72 Monate = 137.13 €

Alle Angaben monatliche Rate ohne Anzahlung. Ein Angebot der Santander Consumer Bank. Eff. Jahreszins zur Zeit 7,90%. Bonität vorausgesetzt. Keine weiteren Kosten.




The new WEDICO construction models bulldozer with ripper should not be missing on any construction site! With the D9T, we placed particular emphasis on functionality, durability and strength. The caterpillar has 2 extremely powerful Dunker motors, which are also designed to be very energy-efficient for long travel times. Like the original, the caterpillar can lift, tilt and tilt the blade (tilting). With the optional rear ripper, the model becomes the ultimate functional model. The kit is of course made of metal and all parts are powder coated. The assembly is done by screws and is feasible for everyone with very detailed instructions. Apart from servos and a suitable remote control, everything for operation is included in the kit.

Technical information:

Kit with driver's cab and superstructures, shield, undercarriage, chain drive with 2 electric motors, 2 Dunker worm gears SG 45, reduction 1:40, proportional control of the chains, hydraulic pump with filter and 13 bar operating pressure, 5-way control valve, hose, T-pieces, Locking sleeves, hydraulic oil. Control block for 5 functions: blade forwards and backwards, raise and lower, tilt, raise and tilt ripper. Electronics with light-sound system and loudspeaker, NiMh battery 12 V 4.5 Ah and speed controller.

Necessary for operation: Remote control with at least 8 channels, servos for hydraulics and charger.

Length without ripper approx. 480 mm, width approx. 320 mm, height approx. 275 mm, track width approx. 160 mm, weight approx. 13.0 kg.

Length with ripper approx. 610 mm, the ripper tooth (Item No. 3131) is included.

Please enter your question and we will response immediately

Notices
You found us on
Payment methods | Shipping
Vorauskasse
PayPal

Wir versenden durch
DHL

Lade ...