TLS-1 charging station gray / red powder-coated for TESLA Wa thicon-models 599.00 €
| FINANZIERUNG | ||
|---|---|---|
| 6 Monate | = | 102.07 € |
| 12 Monate | = | 52.00 € |
| 24 Monate | = | 26.99 € |
| 36 Monate | = | 18.67 € |
| 48 Monate | = | 14.52 € |
| 60 Monate | = | 12.04 € |
| 72 Monate | = | 10.40 € |
Alle Angaben monatliche Rate ohne Anzahlung. Ein Angebot der Santander Consumer Bank. Eff. Jahreszins zur Zeit 7,90%. Bonität vorausgesetzt. Keine weiteren Kosten.
High-quality charging station TLS-1 made of 3mm stainless steel suitable for TESLA Wall Connector. The charging station was designed for the TESLA Wallbox and can be set up practically anywhere. The TLS-1 has also controlled a preparation for LED lighting via a motion detector. In addition, the installation space is prepared for a practical 230V socket.
The assembly can e.g. can also be done on a 50x50cm pavement slab. Thus the TLS-1 is even partially mobile and can still be moved on site.
Delivery: 1x TLS column stainless steel gray RAL 7025 powder-coated, 1x TLS-1 cover with roof stainless steel red RAL3001, 1x cover gray for cut-out Schuko socket, 1x cover for gray motion detector, mounting screws for cover.
Required accessories, not included: 8mm or 10mm ground anchor, TESLA wallbox, motion detector, LED, Schuko socket
Dimensions: Height: 1230mm, width 150mm, depth: 90mm Roof: 344x298mm Weight: approx 33kg Delivery by freight forwarder on a pallet or collection in Essen.
Custom-made products and special powder-coated paints are possible on request. Note: The connection of the wallbox as well as the Schuko socket and LED lighting may only be carried out by qualified specialists! The images with LED, Schuko socket and wallbox are for illustration purposes only and are not included in the scope of delivery!
