WEDICO CAT bulldozer D9T without ripper ARTR demonstration m WEDICO-models 4500.00 €
| FINANZIERUNG | ||
|---|---|---|
| 6 Monate | = | 766.77 € |
| 12 Monate | = | 390.69 € |
| 24 Monate | = | 202.77 € |
| 36 Monate | = | 140.26 € |
| 48 Monate | = | 109.11 € |
| 60 Monate | = | 90.44 € |
| 72 Monate | = | 78.12 € |
Alle Angaben monatliche Rate ohne Anzahlung. Ein Angebot der Santander Consumer Bank. Eff. Jahreszins zur Zeit 7,90%. Bonität vorausgesetzt. Keine weiteren Kosten.
WEDICO CAT D9T bulldozer fully assembled with light, sound and hydraulics. The model is fully assembled and was used as a demonstration model. Easy off-road use!
Except for a remote control everything is ready to use. The caterpillar has light, sound, hydraulic system and a 12V drive battery.
We can install a suitable remote control for you on request.
Shipping only on a pallet by forwarding agency or collection in Essen.
Technical information:
Model with driver's cab and superstructure, shield, undercarriage, chain drive with 2 electric motors, 2 Dunker SG 45 worm gears, reduction 1:40, proportional control of the chains, hydraulic pump with filter and 13 bar operating pressure, 3-way control valve, hose, T-pieces, Locking sleeves, hydraulic oil. Control block for 3 functions: blade forwards and backwards, raise and lower, tilt. Electronics with light sound system and speakers, NiMh battery 12 V 4.5 Ah and speed controller. Optional No. 3131-W: Raise and lower ripper, incline.
Necessary for operation: Remote control with at least 8 channels and charger.
Length without ripper approx. 480 mm, width approx. 320 mm, height approx. 275 mm, track width approx. 160 mm, weight approx. 13.0 kg.
Length with ripper approx. 610 mm, the ripper tooth (item no. 3131) is a special accessory.
