1-channel pulse delay WEDICO-Models 29.95 €
A small but important component if you have problems controlling your lighting system in connection with a modern 2.4 GHz remote control. With modern remote controls, the data packets are sent simultaneously. This overwhelms many older lighting systems that were still designed for 40MHz remote controls. Here the data packets came one after the other.
Our new pulse delay module ensures that the necessary signals arrive at the lighting system in sequence. Depending on the lighting system, you need 1-3 delay channels.
If you use the 1-channel pulse delay No.: 2374-W, the signal is delayed by 2.5ms. With the 2-channel impowder delayer then 2 further channels each by 2.5ms. Example:
Channel1: without pulse delay 0ms Channel2: 1-channel pulse delay. 2.5ms Channel3: 2-channel pulse delay. Port1 5.0ms Channel4: 2-channel pulse delay. Port2 7.5ms
Dimensions: Length: 28mm, width: 22mm, height: 14mm
Scope of delivery: 1x 1-channel pulse delay module